Actuador de Turbo (geometria) para turbos Garrett Diesel ^G-186 MERCEDES - ACM004

Preço (com IVA): 170,00 €

Preço (sem IVA): 138,21 €

Descrição

Application

complete NEW aftermarket Turbo Actuator GEARBOX
Calibrated and fully assembled aluminum housing
with motor, gears and CIPOS.

For Turbo Actuators assembled on

Garrett turbo’s, used on most popular diesel engines.

g186 this item for:

Gearbox#	Make	Model	Model	OE#	Turbo#		Year
G-186	Mercedes	E-Class	270CDI	6NW008412	712120:727463		2004-2008

Make/Models

Exceptions/Problem areas

Diagnostic failure rate from these Turbo Actuators:

1. 80% have a mechanical failure in the Turbo Actuator Gearbox. We offer these complete HIGH QUALITY

aftermarket Actuator Gearbox, with a 2 year warranty.

2. 20% have an electronic failure, in the control unit (which is assembled in the black plastic cover).

OE numbers were the item has/can been applied on

1.OE quality gearwheels, till 240 degrees heat resistance.

2. Equipped with OE ‘’Johnson’’ DC motor.

3. Pre-calibrated CIPOS wheel position, so ‘plug and play’ (no additional calibrating needed)
4. Only high quality laser welding

5. Professional End Of Line testing for every unit.
2 Years full European warranty!

the aftermarket replacement is available for the following Gearbox numbers:
G-01     G-02     G-04      G-09    G-13      G-14   G-15
G-20     G-21     G-22      G-23     G-24     G-25    G-26
G-27     G-28     G-29      G-31     G-32     G-33 G-34
G-35    G-36     G-40      G-42     G-44     G-45   G-48
G-49    G-50     G-53      G-54     G-61     G-62   G-64
G-66   G-72    G-74      G-79     G-83     G-84     G-88
G-89     G-92     G-93      G-96     G-103   G-105   G-107
G-108   G-109   G-113   G-117   G-118   G-124   G-125
G-135   G-136   G-138   G-139   G-145   G-149 G-167
G-168   G-169   G-185   G-186   G-187   G-188   G-199
G-202   G-203   G-206   G-208   G-211   G-219   G-221
G-222   G-271   G-273   G-276   G-277   G-282 G-285
G-290

Technical Specifications

if you follow these simple steps for the replacement Gearbox the unit will be assembled within 5 minutes.
1.remove clips
2.remove the control unit (black plastic cover) from the Gearbox
3.place the new control unit (black plastic cover) on the Gearbox (same Gearbox number)
4.attach the six clips
5.Perform a function test for complete Actuator with a Turbo Actuator tester. (for example with the ATD-1 or the VNTT-pro).

Note: After the production of the Actuator Gearbox , each individual Gearbox is fully tested. These tests include precise torque testing. Therefore, expensive torque testing is not needed anymore, when replacing the Actuator Gearbox with our complete aftermarket Turbo Actuator Gearbox assembly

Informações básicas